Desktop Conveyor

Conveyor Specification:

Speed (m/min): 1-10 adjustable       Dimensions (mm): L1200W410

Belt material: Teflon / green leather belt / stainless steel mesh belt     

Number of light sources: two LED light sources can be placed at the same time

Belt effective width: 350mm (with product guider)         Weight: about 10KGS

Power consumption: 50W         UV LED height: adjustable

Internal drafting device of the assembly line: Optional air extraction device 

Top drafting device of the assembly line: an optional suction device.

Docking production line: Both ends can be connected to other assembly lines

Exhaust device switch: Yes           Emergency stop button: Yes

Temperature monitoring report: yes (internal temperature > 55 degrees)   

Conveyor speed display: Yes

Alarm buzzer: Yes

UV LED controller specifications:

Dimensions(mm): depending on the size of the uv led 

Color: color (all aluminum)

Input power: 100-240VAC 

Standby power consumption: <50W

Setting interface: button + key lock / touch screen + password 

Power adjustment range: 10-100%

Controller back-end serial port: pedal, single-chip microcomputer, PLC, RS232 interface.

Number of UV LED heads can be driven: standard 1 PC

1: Data set by display: intensity strength , irradiation time and irradiation mode

2: Multi channel driver: independent control, independent parameters adjustment 

3: Anti-resistance cable: light head and controller is connected by anti-bending Robot Cable.

4: Interlocking signal: short connection allows the light to light, automatic equipment interlock signal, the controller detects the signal after LED to light.

5: Serial port function: can adjust the irradiation time, irradiation mode; other suppliers can only switch on and off LED.

6: Signal: through the detection of the working status of the optical signal and a variety of abnormal alarm signal, automatic implementation of the next step.

7:LED lighting time: there are stored in the internal equipment (such as the replacement of the new light head, can be cleared by manufacturers).

8: Equipment advantage: with the ready signal output function, when at least one head in irradiation condition, the output of the signal; with state signal output function, when the output state signal head closed signal stops working; with the error output signal, the output signal is abnormal error; automation equipment curing this series of equipment correctly according to the command signal.

UV LED head specifications:

Wavelength (nm): 365, 405