Optical manufacturers often use UV oven for mercury lamps when they are glued to lenses. Today, most optical companies are aware of the concept of environmental protection and energy saving, as well as yield and efficiency. Therefore, UVLED light sources are used in the process of lens bonding. Played a great positive role. The lens is pre-cured by gluing, pre-fixed with a certain size of UVLED point light source, and then into the oven (this device can use uvled surface light source, halogen or mercury lamp, uvled light source is recommended), which greatly improves the efficiency. It is also not easy to make the lens center run off. Moreover, the UVLED light source does not require preheating, and is ready to use. Instantly achieve 100% power UV output. (Usually our "UVLED point source" is used in lens bonding pre-curing "UV glue" to cure in 0.5 seconds to 1.5 seconds)
The difference between UVLED point source and traditional UV lamp:
1. Long life: The service life is more than 10 times that of the traditional mercury lamp curing machine, about 3 to 5 years.
2. cold light source, no heat radiation, the surface temperature of the illuminated product is low.
3. instant lighting, no need to preheat to instantly achieve 100% power UV output.
4. The service life is not affected by the number of opening and closing.
5. high energy, stable light output, uniform illumination effect, improve production efficiency.
6. can be customized effective irradiation area, diameter from 2mm to 500mm.
7. It does not contain mercury and does not produce ozone. It is a safer and more environmentally friendly alternative to traditional light source technology.
8. low energy consumption, power consumption is 10% of the traditional mercury lamp curing machine, can save 90% of electricity, a UV LED point source is 20W,
9. maintenance costs are almost zero, using UV-LED curing equipment to save at least 20,000 to 20,000 yuan per year of consumables
10. compact, light a UV LED point source around 3KG
![]() |
|
![]() |
---|